BG Pattern
BG Pattern
BG Pattern

April 29, 2026

Australia’s Inbound Distributors: A Transfer Pricing Re-Test

Cover image for the insight on Australia's inbound distributor transfer pricing risk

A foreign group can sell world-class products in Australia, report strong global profits, and still find its local company under tax review because the Australian distributor earns too little. That is the practical tension behind the Australian Taxation Office’s updated Practical Compliance Guideline PCG 2019/1. The issue is not simply whether an Australian entity “made a profit”. The sharper question is whether that profit is enough for the work it does, the risks it takes, the assets it uses, and the value it builds in Australia.

This matters now. The ATO updated PCG 2019/1 on 22 April 2026. The new guideline applies to income years ending after that date. It covers both existing and new inbound distribution deals. For global groups, this is more than a technical transfer pricing update. It shows how the ATO will spend its compliance resources, which distributors may face questions, and which taxpayers can expect a lighter touch if their terms fall within the lower-risk profile.

What PCG 2019/1 Is Really Trying to Do

PCG 2019/1 is not a safe harbour and does not replace the arm’s length principle. It is a risk-assessment framework used inside the ATO. In plain English, the ATO is saying: if your Australian distributor earns margins within certain ranges, we are more or less likely to spend audit time on your transfer pricing result.

That distinction matters. A company may sit in the “low risk” zone under the guideline and still need proper transfer pricing documentation. Equally, a company may sit in a higher-risk zone and still have sound business reasons for its result. A medical device distributor may face steep launch costs for a new product. An ICT distributor may take a short-term fall in enterprise software spending. The ATO’s profit markers are a screening tool, not a court ruling on arm’s length pricing.

Australia’s transfer pricing rules sit in Subdivision 815-B of the Income Tax Assessment Act 1997. Section 815-135 gives the OECD Transfer Pricing Guidelines a role in finding arm’s length conditions. The documentation regime sits in Subdivision 284-E of Schedule 1 to the Taxation Administration Act 1953. Under it, contemporaneous documentation can count toward penalty relief. The practical message is that PCG analysis should sit alongside a full functional and comparability analysis, not instead of it.

The Business Model Behind the Tax Risk

An inbound distributor is often an Australian entity that buys goods from a foreign related party and resells them to local customers. It may also sell digital products or services where the intellectual property sits offshore. The ATO’s updated guidance matters because many local companies call themselves “routine distributors”, yet in practice they often do more than routine resale.

Consider a pharmaceutical group. The Australian company may import finished products from Europe, but its local team may also deal with regulators, manage hospital tenders, train doctors, build local interest in the product, and keep ties with government payers. Those tasks are not passive order-taking. They can create market value. The more value the Australian team creates, the harder it is to defend a thin local margin by saying that the intellectual property sits offshore.

The updated PCG also widens the practical scope of the guidance. Published commentary on the final update notes that the ATO widened the inbound distributor definition and tightened the treatment of digital product distributors. The definition now reaches cases where Australian entities or related parties clearly contribute to product creation, or run large Australian equipment used to host or serve the product. This matters most for software, cloud, platform, gaming, cybersecurity, and data-enabled businesses.

Why EBIT Margins Are at the Centre of the Framework

The ATO’s framework judges profit performance mainly through EBIT to sales, usually on a five-year weighted average. The aim is to smooth out a single bad year or one unusually strong year. A distributor that earns 1 percent in one year and 8 percent the next should not be judged on the worse year alone if the full business cycle tells a different story.

In practice, though, the numbers can be hard to pin down. The key question is not always “What is the company’s EBIT margin?” It is often “What is the EBIT margin from the inbound distribution deal?” A company may have many streams: related-party product distribution, third-party trading, local services, install work, warranty support, and perhaps a small manufacturing or custom unit. If the finance system cannot split those results reliably, the tax team may struggle to place itself in the right PCG risk zone.

This is where many disputes start. A global group may see Australia as a sales arm. The ATO may see the same entity as a local developer that builds market value. Finance may report results by legal entity, while transfer pricing needs a split by transaction. The gap between those views can become an audit issue.

What Changed in the 2026 Update

The 2026 update matters because the ATO reset profit markers for certain sectors, mainly life sciences and information and communication technology. Grant Thornton’s analysis of the draft update largely matched the final update later reported by Australian tax media. It found that life sciences Category 1 moved to high risk below 3.0 percent, medium risk between 3.0 percent and 4.9 percent, and low risk at or above 4.9 percent. For life sciences Category 2, the new markers moved to high risk below 5.0 percent, medium risk between 5.0 percent and 8.0 percent, and low risk at or above 8.0 percent. ICT Category 1 moved to high risk below 2.9 percent, medium risk between 2.9 percent and 4.1 percent, and low risk at or above 4.1 percent.

General distributors and motor vehicle distributors did not see the same kind of benchmark change. But the wider scope of the inbound distributor definition may still pull in more taxpayers. Some groups that once treated PCG 2019/1 as irrelevant may now need to look at it again.

The ATO also added a “white zone”. This matters for taxpayers with an agreed or reviewed position, such as a signed Advance Pricing Arrangement, a settlement deal, a relevant court or tribunal ruling, or a recent low-risk or high-assurance ATO result, provided the deal has not changed in substance. The ATO’s stated approach is that it should not need to spend further compliance resources beyond checking that the agreed approach still holds.

The Digital Distributor Problem

The digital economy blurs the old transfer pricing labels. A software reseller may look like a distributor on paper. Yet the Australian entity may run servers, localise content, help with setup, run links into client systems, or shape product design through customer feedback. Those tasks can push the analysis away from a simple buy-sell distributor model.

This also matters because the OECD’s Amount B work aims to make the arm’s length rule simpler for baseline marketing and distribution activities. The OECD calls Amount B a simplified and streamlined approach for in-country baseline marketing and distribution activities, now built into the OECD Transfer Pricing Guidelines. But baseline is the key word. Where an Australian digital business does real work on product creation, hosting systems, customer setup, or business strategy, it may not fit easily within a routine distributor framework.

For groups with Australian SaaS, cloud, digital advertising, cybersecurity, enterprise platform, or gaming arms, the practical question is whether the local entity merely sells access to offshore IP or does work of real economic weight in Australia. That is a question of fact, and the answer should be written down before the ATO asks.

How This Affects Real-World Tax Governance

The updated PCG should change how boards and tax teams check their Australian companies. It is not enough to prepare a benchmarking report once every few years and file it away. The company should map its actual business model against the PCG categories, work out the five-year weighted average EBIT margin, tie that margin back to the statutory accounts, and explain any gap between legal-entity results and results for the distribution segment.

For Significant Global Entities and Country-by-Country reporting groups, the governance load is higher. Australia’s SGE and CbC reporting rules use an A$1 billion annual global income threshold in some cases, and large groups can face extra reporting and penalty risk. If the taxpayer also lodges a Reportable Tax Position schedule, PCG risk ratings can become part of a wider public picture. In other words, the ATO may not need to find the risk through audit. The taxpayer may, in effect, disclose it through its own compliance filings.

What Case Law Teaches Beyond the PCG

Australian transfer pricing cases show that evidence matters. In Chevron Australia Holdings Pty Ltd v Commissioner of Taxation [2017] FCAFC 62, the Full Federal Court upheld transfer pricing adjustments on related-party financing. The ruling stressed the need to test what independent parties might reasonably be expected to have done in like conditions. In Glencore Investment Pty Ltd v Commissioner of Taxation [2019] FCA 1432, later heard on appeal, the dispute turned heavily on the pricing in the contract, the market evidence, and the limits of reconstruction.

These cases are not inbound distribution cases in the narrow sense, but they carry a clear lesson. Transfer pricing outcomes are defended with facts, contracts, conduct, comparables, and business logic. A PCG risk zone may shape where the ATO looks, but the taxpayer’s defence still rests on whether the related-party terms match arm’s length conduct.

What Businesses Should Do Now

The first step is to work out whether the Australian entity is within the PCG at all. That means checking what it sells, who owns the IP, who makes or changes the product, who does the local marketing and deals with regulators, and whether any Australian systems or staff clearly add to product value.

The second step is to work out the EBIT to sales margin, split properly by segment. This should not be a routine finance exercise. Tax, finance, operations, sales, and legal teams often need to work together, because the transfer pricing story must match the business reality.

The third step is to decide whether the current pricing policy still fits. A distributor in the medium or high-risk zone does not need a year-end adjustment on its own, but it does need a sound reason. Sometimes the answer is business: market entry losses, a supply gap, slow approvals, or stale stock. Sometimes the answer lies in structure: the Australian entity is doing more than the group’s old transfer pricing policy allows for.

A Practical Takeaway

The updated PCG 2019/1 is not just an ATO benchmarking note. It shows how the Australian tax office thinks about local value creation in global distribution models. The most exposed taxpayers are not always those with the lowest margins. They are those whose documents say “routine distributor” while their people, systems, risks, and customer ties tell a fuller story.

For inbound groups, the right response is not panic and not surface margin management. The right response is a steady review of your own position. Know your functions. Split your numbers. Align your contracts with conduct. Keep documentation that explains the business story in language a tax authority can test. The businesses that do this well will not just handle ATO risk better. They will know their Australian operating model better, and that is often where good transfer pricing and good management meet.

A foreign group can sell world-class products in Australia, report strong global profits, and still find its local company under tax review because the Australian distributor earns too little. That is the practical tension behind the Australian Taxation Office’s updated Practical Compliance Guideline PCG 2019/1. The issue is not simply whether an Australian entity “made a profit”. The sharper question is whether that profit is enough for the work it does, the risks it takes, the assets it uses, and the value it builds in Australia.

This matters now. The ATO updated PCG 2019/1 on 22 April 2026. The new guideline applies to income years ending after that date. It covers both existing and new inbound distribution deals. For global groups, this is more than a technical transfer pricing update. It shows how the ATO will spend its compliance resources, which distributors may face questions, and which taxpayers can expect a lighter touch if their terms fall within the lower-risk profile.

What PCG 2019/1 Is Really Trying to Do

PCG 2019/1 is not a safe harbour and does not replace the arm’s length principle. It is a risk-assessment framework used inside the ATO. In plain English, the ATO is saying: if your Australian distributor earns margins within certain ranges, we are more or less likely to spend audit time on your transfer pricing result.

That distinction matters. A company may sit in the “low risk” zone under the guideline and still need proper transfer pricing documentation. Equally, a company may sit in a higher-risk zone and still have sound business reasons for its result. A medical device distributor may face steep launch costs for a new product. An ICT distributor may take a short-term fall in enterprise software spending. The ATO’s profit markers are a screening tool, not a court ruling on arm’s length pricing.

Australia’s transfer pricing rules sit in Subdivision 815-B of the Income Tax Assessment Act 1997. Section 815-135 gives the OECD Transfer Pricing Guidelines a role in finding arm’s length conditions. The documentation regime sits in Subdivision 284-E of Schedule 1 to the Taxation Administration Act 1953. Under it, contemporaneous documentation can count toward penalty relief. The practical message is that PCG analysis should sit alongside a full functional and comparability analysis, not instead of it.

The Business Model Behind the Tax Risk

An inbound distributor is often an Australian entity that buys goods from a foreign related party and resells them to local customers. It may also sell digital products or services where the intellectual property sits offshore. The ATO’s updated guidance matters because many local companies call themselves “routine distributors”, yet in practice they often do more than routine resale.

Consider a pharmaceutical group. The Australian company may import finished products from Europe, but its local team may also deal with regulators, manage hospital tenders, train doctors, build local interest in the product, and keep ties with government payers. Those tasks are not passive order-taking. They can create market value. The more value the Australian team creates, the harder it is to defend a thin local margin by saying that the intellectual property sits offshore.

The updated PCG also widens the practical scope of the guidance. Published commentary on the final update notes that the ATO widened the inbound distributor definition and tightened the treatment of digital product distributors. The definition now reaches cases where Australian entities or related parties clearly contribute to product creation, or run large Australian equipment used to host or serve the product. This matters most for software, cloud, platform, gaming, cybersecurity, and data-enabled businesses.

Why EBIT Margins Are at the Centre of the Framework

The ATO’s framework judges profit performance mainly through EBIT to sales, usually on a five-year weighted average. The aim is to smooth out a single bad year or one unusually strong year. A distributor that earns 1 percent in one year and 8 percent the next should not be judged on the worse year alone if the full business cycle tells a different story.

In practice, though, the numbers can be hard to pin down. The key question is not always “What is the company’s EBIT margin?” It is often “What is the EBIT margin from the inbound distribution deal?” A company may have many streams: related-party product distribution, third-party trading, local services, install work, warranty support, and perhaps a small manufacturing or custom unit. If the finance system cannot split those results reliably, the tax team may struggle to place itself in the right PCG risk zone.

This is where many disputes start. A global group may see Australia as a sales arm. The ATO may see the same entity as a local developer that builds market value. Finance may report results by legal entity, while transfer pricing needs a split by transaction. The gap between those views can become an audit issue.

What Changed in the 2026 Update

The 2026 update matters because the ATO reset profit markers for certain sectors, mainly life sciences and information and communication technology. Grant Thornton’s analysis of the draft update largely matched the final update later reported by Australian tax media. It found that life sciences Category 1 moved to high risk below 3.0 percent, medium risk between 3.0 percent and 4.9 percent, and low risk at or above 4.9 percent. For life sciences Category 2, the new markers moved to high risk below 5.0 percent, medium risk between 5.0 percent and 8.0 percent, and low risk at or above 8.0 percent. ICT Category 1 moved to high risk below 2.9 percent, medium risk between 2.9 percent and 4.1 percent, and low risk at or above 4.1 percent.

General distributors and motor vehicle distributors did not see the same kind of benchmark change. But the wider scope of the inbound distributor definition may still pull in more taxpayers. Some groups that once treated PCG 2019/1 as irrelevant may now need to look at it again.

The ATO also added a “white zone”. This matters for taxpayers with an agreed or reviewed position, such as a signed Advance Pricing Arrangement, a settlement deal, a relevant court or tribunal ruling, or a recent low-risk or high-assurance ATO result, provided the deal has not changed in substance. The ATO’s stated approach is that it should not need to spend further compliance resources beyond checking that the agreed approach still holds.

The Digital Distributor Problem

The digital economy blurs the old transfer pricing labels. A software reseller may look like a distributor on paper. Yet the Australian entity may run servers, localise content, help with setup, run links into client systems, or shape product design through customer feedback. Those tasks can push the analysis away from a simple buy-sell distributor model.

This also matters because the OECD’s Amount B work aims to make the arm’s length rule simpler for baseline marketing and distribution activities. The OECD calls Amount B a simplified and streamlined approach for in-country baseline marketing and distribution activities, now built into the OECD Transfer Pricing Guidelines. But baseline is the key word. Where an Australian digital business does real work on product creation, hosting systems, customer setup, or business strategy, it may not fit easily within a routine distributor framework.

For groups with Australian SaaS, cloud, digital advertising, cybersecurity, enterprise platform, or gaming arms, the practical question is whether the local entity merely sells access to offshore IP or does work of real economic weight in Australia. That is a question of fact, and the answer should be written down before the ATO asks.

How This Affects Real-World Tax Governance

The updated PCG should change how boards and tax teams check their Australian companies. It is not enough to prepare a benchmarking report once every few years and file it away. The company should map its actual business model against the PCG categories, work out the five-year weighted average EBIT margin, tie that margin back to the statutory accounts, and explain any gap between legal-entity results and results for the distribution segment.

For Significant Global Entities and Country-by-Country reporting groups, the governance load is higher. Australia’s SGE and CbC reporting rules use an A$1 billion annual global income threshold in some cases, and large groups can face extra reporting and penalty risk. If the taxpayer also lodges a Reportable Tax Position schedule, PCG risk ratings can become part of a wider public picture. In other words, the ATO may not need to find the risk through audit. The taxpayer may, in effect, disclose it through its own compliance filings.

What Case Law Teaches Beyond the PCG

Australian transfer pricing cases show that evidence matters. In Chevron Australia Holdings Pty Ltd v Commissioner of Taxation [2017] FCAFC 62, the Full Federal Court upheld transfer pricing adjustments on related-party financing. The ruling stressed the need to test what independent parties might reasonably be expected to have done in like conditions. In Glencore Investment Pty Ltd v Commissioner of Taxation [2019] FCA 1432, later heard on appeal, the dispute turned heavily on the pricing in the contract, the market evidence, and the limits of reconstruction.

These cases are not inbound distribution cases in the narrow sense, but they carry a clear lesson. Transfer pricing outcomes are defended with facts, contracts, conduct, comparables, and business logic. A PCG risk zone may shape where the ATO looks, but the taxpayer’s defence still rests on whether the related-party terms match arm’s length conduct.

What Businesses Should Do Now

The first step is to work out whether the Australian entity is within the PCG at all. That means checking what it sells, who owns the IP, who makes or changes the product, who does the local marketing and deals with regulators, and whether any Australian systems or staff clearly add to product value.

The second step is to work out the EBIT to sales margin, split properly by segment. This should not be a routine finance exercise. Tax, finance, operations, sales, and legal teams often need to work together, because the transfer pricing story must match the business reality.

The third step is to decide whether the current pricing policy still fits. A distributor in the medium or high-risk zone does not need a year-end adjustment on its own, but it does need a sound reason. Sometimes the answer is business: market entry losses, a supply gap, slow approvals, or stale stock. Sometimes the answer lies in structure: the Australian entity is doing more than the group’s old transfer pricing policy allows for.

A Practical Takeaway

The updated PCG 2019/1 is not just an ATO benchmarking note. It shows how the Australian tax office thinks about local value creation in global distribution models. The most exposed taxpayers are not always those with the lowest margins. They are those whose documents say “routine distributor” while their people, systems, risks, and customer ties tell a fuller story.

For inbound groups, the right response is not panic and not surface margin management. The right response is a steady review of your own position. Know your functions. Split your numbers. Align your contracts with conduct. Keep documentation that explains the business story in language a tax authority can test. The businesses that do this well will not just handle ATO risk better. They will know their Australian operating model better, and that is often where good transfer pricing and good management meet.

Cubic Pattern

Get started today

Let’s talk

If you are evaluating cross-border expansion, restructuring, or strengthening compliance and audit readiness, we can help you plan and execute with clarity.

Cubic Pattern

Get started today

Let’s talk

If you are evaluating cross-border expansion, restructuring, or strengthening compliance and audit readiness, we can help you plan and execute with clarity.

Cubic Pattern

Get started today

Let’s talk

If you are evaluating cross-border expansion, restructuring, or strengthening compliance and audit readiness, we can help you plan and execute with clarity.